Pipette Filler Holder is made from clear acrylic. The pipette filler holder fits most pipette fillers. Holder dimensions are 9”H x 6”D x 5 1/2”W. The hole is 1.25”.
Email today to customize your own Pipette Filler Holder
Important Cleaning Note: Should the acrylic surfaces of acrylic products need cleaning, DO NOT USE ANY SOLVENTS OR ABRASIVES (alcohol, acetone, etc...) USE OF THESE MATERIALS WILL CAUSE CRACKING OR CRAZING OF THE ACRYLIC. For general cleaning either use SLIDE Foamaction Plastic Cleaner or wash the surface with a mild detergent and soft cloth, then rinse thoroughly with clean water.
|
WARNING: This product can expose you to chemicals including 2-Propenoic acid, ethyl ester which are known to the state of California to cause cancer. For more information: www.p65warnings.ca.gov
|